Ningbo Kingvos Electrical Appliance Co.,Ltd
Model No.: KV-JQ401
Packaging: Double Bliter Sealed
Productivity: 30000pcs Per Day
Place of Origin: China
Supply Ability: 400,000pcs per Month
40 W Electric Mini Power Tools Traditional Item Features:
The heater component of the product is make of Positive Temperature Coefficient Electric resistance(PTC). It's heating very fast and automatic of control temperature. The Hot Melt Glue Gun can use normally in 100V to 240V electrical,inside place the fuse,use more safe. Features:
An efficient melt chamber reduces effort required to extrude adhesive and minimises fatigue.
The thin profile of the tool provides excellent visibility and helps to ensure correct position and quantity of adhesive every time.
This glue gun is designed for all types of craft projects as well as light home repairs.
40 W Electric Mini Power Tools Traditional Item Specification:
|Input:||110-250V, AC, 40(12)W||Flow rate of glue:||10-14g/min|
|Diameter of glue stick:||10.8~11.5 mm||Length of glue stick:||70~300 mm|
|Application temperature:||130~290℃||Product weight:||196 g|
|Nozzel diameter:||1.0~2.0 mm||Pre-heating time:||3-5 mins|
|Product Size:||16x14.4 cm||Certification:||CE,GS,ROHS,KC,SAA,ISO|
|Inner box:||10 pcs||Outer ctn:||40 pcs|
| Inner box size: ||42x28x16 cm||Outer ctn size:||57x43.5x34 cm|
|G.W.:||11.9 kgs||N.W.:||7.8 kgs|
40 W Electric Mini Power Tools Traditional Item Show:
40 W Electric Mini Power Tools Traditional Item General Safety Information:
1. Check if the plug cord was in good condition, and if there is stand before plug into the electrical outlet ; Check if the used glue gun has glue flow through back of the tunnel;
2. wait 5-10 minutes to allow glue to soften, stand up the glue gun on the table when not in use;
3. Touch nozzle to any clean, dry surface you wish to bond, to avoid any impurity stop the nozzle;
4. If the glue could not flow from the nozzle when the glue gun start to work, check if the glue gun are heating;
If glue gun can not be heated, there are following reasons:
1 Plug cord into electrical outlet not properly;
2 Glue gun has been destroyed owing to inner cord short circuit;
If glue gun can be heated, there are following reasons: Nozzle has been stopped by any impurity, ask careerman to manage it.
5. Do not use the glue gun under moist climate, humidity will affect insulation and cause electric shock;
6. Do not touch the nozzle or melted glue;
7. Do not remove out the melted glue stick from the tunnel back side, it will damaged the glue gun as well as scalding person hands.
8. Do not to disassemble or assemble any glue gun accessories freely, it will cause glue gun do not work properly;
9. Keep out of reach of children and stocked it beyond any of Children palpable side;
10. Only used for melting glue stick, no other usage;
11. When in use, there are any glue flow back from tunnel, stop using immediately, wait for careerman clean the glue;
12. Close the power if the glue gun not in use after 15 minutes;
40 W Electric Mini Power Tools Traditional Item Using methods
1. Glue gun using voltage is 110-220V AC,50/60 Hz;
2. Tip gun forward on stand and place a piece of cardboard under the nozzle
3. Use 7-8 mm (mini trigger glue gun), 11-12(big trigger glue gun), insert Glue Sticks through tunnel at back of gun
4. After power, wait for 5-10 minutes to allow glue to soften
5. After glue softens, squeeze trigger to feed glue through glue barrel. Excessive force will damage glue gun. Put down nozzle after work, disconnect the power plug.
Copyright © 2020 Ningbo Kingvos Electrical Appliance Co.,Ltd All rights reserved.