Ningbo Kingvos Electrical Appliance Co.,Ltd
Model No.: KV-JQ103
Packaging: Double Bliter Sealed
Productivity: 30000pcs Per Day
Place of Origin: China
Supply Ability: 400,000pcs per Month
20 W Mini High Temperature Glue Gun Feature:
1. Quickly melt the glue (internal PTC heater).
2. The canno barrel is stable made by advanced engineering plastic.
3. Adopt high-tech electronic ceramics PTC, quickly heating up(2 minute up to peak value),
4. Quickly melt the glue, energy efficient.
5. The bits of the gun is no lead which is environmental protection ,and non-pollution . It have passed the SGS environmental protection proof.
6. The bits of gun can regulate the flow, easily rule out the blockage.
7. The canno barrel and structure are legerity. Plastic-aluminum bore, heat insulation device, do not bleed-through, operating comfort
20 W Mini High Temperature Glue Gun Function:
1. The glue gun can be used in many surfaces,such as wood,plastics,foam,fabrics,paper,cardboard,ceramics...ets. As well as objects which have cracks or poorly jointed.
2. The glue gun can also be used in caulking waterproof material,repairing a leak in a pail ,fixing a leaky rain gutter.
3. You may also use the gun in repairing chairs,restoring furniture, laying electrical circuits as well as binding car Repairs,sticking tiles and gluing together of wire netting.
Power & Constant available, glue melting efficiently
20 W Mini High Temperature Glue Gun Specification:
|Input:||110-250V, AC, 20 W||Flow rate of glue:||6-8 g/min|
|Diameter of glue stick:||6.8~7.4 mm||Length of glue stick:||70~300 mm|
|Application temperature:||130~290℃||Product weight:||145g|
|Nozzel diameter:||1.0~2.0 mm||Pre-heating time:||3-5 mins|
|Product Size:||13.6x13 cm||Certification:||CE,GS,ROHS,KC,SAA,ISO|
|Inner box:||10 pcs||Outer ctn:||40 pcs|
|Inner box size:||28x27x14 cm||Outer ctn size:||58.5x29x30 cm|
|G.W.:||8.4 kgs||N.W.:||5.8 kgs|
20 W Mini High Temperature Glue Gun Show:
20 W Mini High Temperature Glue Gun Using Methods :
1. Glue gunusing voltage is 110-220V AC,50/60 Hz;
2. Tip gunforward on stand and place a piece of cardboard under the nozzle
3. Use 7-8 mm(mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticksthrough tunnel at back of gun
4. After power,wait for 5-10 minutes to allow glue to soften
5. After gluesoftens, squeeze trigger to feed glue through glue barrel. Excessive force willdamage glue gun. Put down nozzle after work, disconnect the power plug.
Copyright © 2018 Ningbo Kingvos Electrical Appliance Co.,Ltd All rights reserved.