Ningbo Kingvos Electrical Appliance Co.,Ltd
Model No.: KV-JQ103
Packaging: Double Bliter Sealed
Productivity: 30000pcs Per Day
Place of Origin: China
Supply Ability: 400,000pcs per Month
20 W Electric Glue Gun Manual
How to use 20W Electric Glue Gun
Plug in 20W Electric Glue Gun. Load the Glue Sticks into the back of the 20 W Electric Glue Gun.
Press trigger several times until the glue stick is firmly set into the inlet tube.
Allow the 20W Electric Glue Gun to warm up for approximately 5 minutes.
Squeeze trigger until glue flows from nozzle.
Glue need not to be spread. Press surfaces together within 15 seconds. Use of clamps or other bonding devices is not necessary. Clean surfaces for best bonding.
Unplug 20 W Electric Glue Gun when finished. No clean up required. Never pull the glue stick up out the back of 20W Electric Glue Gun.
20W Electric Glue Gun Specification:
|Input:||110-250V, AC, 20 W||Flow rate of glue:||6-8 g/min|
|Diameter of glue stick:||6.8~7.4 mm||Length of glue stick:||70~300 mm|
|Application temperature:||130~290 ℃||Product weight:||145 g|
|Nozzel diameter:||1.0~2.0 mm||Pre-heating time:||3-5 mins|
|Product Size:||13.6x13 cm||Certification:||CE,GS,ROHS,KC,SAA,ISO|
|Inner box:||10 pcs||Outer ctn:||40 pcs|
|Inner box size:||28x27x14 cm||Outer ctn size:||58.5x29x30 cm|
|G.W.:||8.4 kgs||N.W.:||5.8 kgs|
20 W Electric Glue Gun Show:
20 W Electric Glue Gun Using Methods :
1. Glue gun using voltage is 110-220V AC,50/60 Hz;
2. Tip gun forward on stand and place a piece of cardboard under the nozzle
3. Use 7-8 mm (mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks through tunnel at back of gun
4. After power, wait for 5-10 minutes to allow glue to soften
5. After glue softens, squeeze trigger to feed glue through glue barrel. Excessive force will damage glue gun. Put down nozzle after work, disconnect the power plug.
Copyright © 2019 Ningbo Kingvos Electrical Appliance Co.,Ltd All rights reserved.