Ningbo Kingvos Electrical Appliance Co.,Ltd
Model No.: KV-JQ101K
Packaging: Double Bliter Sealed
Productivity: 30000pcs Per Day
Place of Origin: China
Supply Ability: 400,000pcs per Month
10 W Plastic Glue Gun with Top Quality Description:
Widely used in electronics, electrical appliances industry, especially for home-made hand-industry. Can be used for toys, artificial flower, furniture, decoration, handicraft, etc....
Warm tips: Care should be taken because hot glue is dangerous.
Always keep hands and fingers away from the glue as it is forced out of the nozzle.
10 W Plastic Glue Gun with Top Quality should be switched on at least five to ten minutes before they are used. This allows the heating element and the glue next to it, to heat up. The glue stick becomes very hot and melts becoming molten. At this stage it can be used to glue materials together. However, care should be taken because hot glue is dangerous.
Always keep hands and finger s away from the glue as it is forced out of the nozzle.
10 W Plastic Glue Gun with Top Quality Specification:
|Input:||110-250V, AC, 10 W||Flow rate of glue:||6-8 g/min|
|Diameter of glue stick:||6.8~7.5 mm||Length of glue stick:||70~300 mm|
|Application temperature:||130~290℃||Product weight:||123 g|
|Nozzel diameter:||1.0~2.0 mm||Pre-heating time:||3-5 mins|
|Product Size:||12.2x11.1 cm||Certification:||CE,GS,ROHS,KC,SAA,ISO|
| Inner box: ||10 pcs||Outer ctn:||80 pcs|
|Inner box size:||34x23x13.2 cm||Outer ctn size:||56x35.5x49 cm|
|G.W.:||14.2 kgs||N.W.:||9.2 kgs|
10 W Plastic Glue Gun with Top Quality Show:
10 W Plastic Glue Gun with Top Quality General Safety Information:
1. Check if the plug cord was in good condition, and if there is stand before plug into the electrical outlet ; Check if the used glue gun has glue flow through back of the tunnel;
2. Wait 5-10 minutes to allow glue to soften, stand up the glue gun on the table when not in use;
3. Touch nozzle to any clean, dry surface you wish to bond, to avoid any impurity stop the nozzle;
4. If the glue could not flow from the nozzle when the glue gun start to work, check if the glue gun are heating;
If glue gun can not be heated, there are following reasons:
1 Plug cord into electrical outlet not properly;
2 Glue gun has been destroyed owing to inner cord short circuit;
If glue gun can be heated, there are following reasons: Nozzle has been stopped by any impurity, ask careerman to manage it.
5. Do not use the glue gun under moist climate, humidity will affect insulation and cause electric shock;
6. Do not touch the nozzle or melted glue;
7. Do not remove out the melted glue stick from the tunnel back side, it will damaged the glue gun as well as scalding person hands.
8. Do not to disassemble or assemble any glue gun accessories freely, it will cause glue gun do not work properly;
9. Keep out of reach of children and stocked it beyond any of Children palpable side;
10. Only used for melting glue stick, no other usage;
11. When in use, there are any glue flow back from tunnel, stop using immediately, wait for careerman clean the glue;12. Close the power if the glue gun not in use after 15 minutes
Copyright © 2018 Ningbo Kingvos Electrical Appliance Co.,Ltd All rights reserved.