Ningbo Kingvos Electrical Appliance Co.,Ltd
Model No.: KV-JQ101K
Packaging: Double Bliter Sealed
Productivity: 30000pcs Per Day
Place of Origin: China
Supply Ability: 400,000pcs per Month
10 W Pneumatic Glue Gun with 100% Inspection are great tools for crafts, floral and DIY job.
Grab mouth: Copper
Glue Sticks size : 7 mm
10 W Pneumatic Glue Gun with 100% Inspection constant temperature Use for artificial flowers, craft projects, furniture and wood working.
Heat element :Ceramic heating
Frequency: 50-60 Hz.
Nozzle material: copper
10 W Pneumatic Glue Gun with 100% Inspection Specification:
|Input:||110-250V, AC, 10 W||Flow rate of glue:||6-8 g/min|
|Diameter of glue stick:||6.8~7.5 mm||Length of glue stick:||70~300 mm|
|Application temperature:||130~290℃||Product weight:||123 g|
|Nozzel diameter:||1.0~2.0 mm||Pre-heating time:||3-5 mins|
|Product Size:||12.2x11.1 cm||Certification:||CE,GS,ROHS,KC,SAA,ISO|
| Inner box: ||10 pcs||Outer ctn:||80 pcs|
|Inner box size:||34x23x13.2 cm||Outer ctn size:||56x35.5x49 cm|
|G.W.:||14.2 kgs||N.W.:||9.2 kgs|
10 W Pneumatic Glue Gun with 100% Inspection Show:
10 W Pneumatic Glue Gun with 100% Inspection Important Caution:
1． Before use the glue gun, check if the plug cord into electrical outlet properly;
2． When glue gun in first use, the heating element will have small smoke, it is normal situation, but the smoke will disappeared after 10 minutes;
3． After power, not for a long time in standby mode(not longer for 20 minutes), when the suspension of use, unplug first.
4． Avoid to use the glue gun under very hot or very cold environments.
5． Better not work under direct cold wind blowing, it will reduce efficiency and loss power
6． When in continuous using, do not press the trigger with great pressure, and try to squeeze out the un-melted glue, it would damage the glue gun
7． Not applicable for bonding heavy objects or objects needed strong adhesive
8． The quality of glue stick will directly influence the glue gun function and sticking objects quality;
9． If the power cord is damaged, do not replace it by yourself, must ask for professionals to replace it.
10． This tools must b e placed in its position when not in use. And storage before the tools complete cooled.
11． Be careful when using any other electrical appliance with flammable material.
12． Not applicable for a long time in the same place.
13． Do not use an explosive gas atmospheres.
14． Note that heat may be the line of sigh, combustible materials.
15． Do not leave equipment unattended when switched on.
16． This appliance is not intended for use by persons(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
17． Children should be supervised to ensure that they do not play with the appliance.
10 W Pneumatic Glue Gun with 100% Inspection Using methods:
1. Glue gun using voltage is 110-220V AC,50/60 Hz;
2. Tip gun forward on stand and place a piece of cardboard under the nozzle
3. Use 7-8 mm (mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks through
tunnel at back of gun
4. After power, wait for 5-10 minutes to allow glue to soften
5. After glue softens, squeeze trigger to feed glue through glue barrel. Excessive force will damage glue gun. Put down nozzle after work, disconnect the power plug.
Copyright © 2020 Ningbo Kingvos Electrical Appliance Co.,Ltd All rights reserved.